Project 2. In Progress....

 For this project, I will be making an 3D emoji that can talk.

A rough picture of what I am going to make. Specifics may change.


The mouth of this emoji can open and close, thus making it seems like the emoji is talking. The head will be 3D printed and the hat and hair will be made out of paper. Here is a detail look at the mechanism that will open and close the mouth.

Mouth mechanism



The motor turns Part C that is locked onto the motor with set screw. Part C then interacts with Part B which is connnected to a moving flap that periodically cover and uncover the mouth opening. Part A is connected to the shell, which is a semi sphere. Once everything is put together, you can then put the other half of the shell on it, completing the whole emoji.



Popular posts from this blog

Project 2: Motorized Automata-Finished.

Image
This is a 3D printed emoji head that seats your phone on top and says whatever is playing on your phone. You can adjust its talking speed with a knob to match the tempo of whatever is playing.   The knob is for the PWM speed controller. I first looked for a mechanism that could turn the rotating motion of the motor into a cyclic back and forth motion that mimics the movement of human mouth. I found it on the 507 Mechanical Movements website. Then I 3D printed it out to see if the mechanism would work.  Testing just the mechanism After know this mechanism could work, I printed the head. There were some problems. The first is the upper part of the mouth wasn't printed correctly. This seems to be from the 3D printer. So I later tweaked the way the two semi-spheres came together. Instead of having to screw them together, I opted for a simple snap on fit with two screws on the sides to secure them together. The second problem is that the slot on top of the head was too shallow so tha
Read more

Project 1: Digital Surrealism

Image
Project Statement I was talking about this project with my instructor and what surrealism meant. As defined in the project requirements, "t he original meaning of the found object must be transformed through the process of augmentation." I pointed to my water bottle and showed my instructor how I could turn the water bottle into a pen with the bottle part holding the ink, by screwing onto the bottle a 3D printed "pen nib." Here is my initial sketch. (Initial sketch) Process Then I went out and found a water bottle that looks most like a pen. Using the water bottle dimension, I defined the dimensions of the pen nib.  (Defining the dimension of the 3D printed part) I tried printing several parts with different threads to find the right thread that can be screwed onto the bottle. I adjusted the diameter, pitch of the threads, etc. (3D models of bottle caps with different threads) (None of the threads fit the bottle correctly) But none would fit the bottle correctly. I
Read more